The one sunny day we had with three people (Thursday) was put to productive use. The intention was to finish the roof by the end of the day but we fell a little short of that. We were however, able to complete the entire roof framework. Two days later, FM and I added the sheet metal until we ran out of metal...and screws. The metal pieces are on special order (we had them cut to size) so we're as far as we can go on the roof for right now. Today we are going to work on picking out pallets for the permanent floor.
Visual update on the progress thus far.
Visual update on the progress thus far.
First we mounted 2x4's on their sides using roof mounting brackets.
Then we attached 1x4's using wood screws.
We had to build a platform using pallets because the ladders weren't tall enough.
The Bear stood watch over the tools (and drinks).
Then we added 8x4 sheet metal pieces using special pole barn screws. They have a built in washer and little gasket that seals itself over the hole as you sink it to prevent water leaks.
Next week we are going to work on adding a more permanent floor and sealing the exposed wood to make it more weatherproof. After that we are starting on the OSB boards and siding. This shed is starting to come together - finally!